ZHERUTONG Q-Type Aluminum Alloy Enclosure Power Supply Lighting Busway is a lighting busway system designed for lighting and small power distribution in industrial and commercial buildings. It uses PVC insulation and an aluminum alloy enclosure to support clean installation, flexible tap-off points, and stable power distribution.
The system is designed with 7 copper strips. The lower 5 copper strips are used for three-phase power supply, including three-phase four-wire or three-phase five-wire systems, or for single-phase power supply through equal current distribution. The upper 2 copper strips are used for lighting circuits.
With a rated current range from 18A to 100A, this lighting bus duct is suitable for garment factories, footwear factories, headwear factories, electronics factories, underground parking areas, supermarkets, and production line lighting applications.
Contact ZHERUTONG for lighting busway system selection and quotation.
Email: rtdq@rtbusway.com
Tel: +86-13867770913
The Q-Type lighting busway system is used for combined power supply and lighting distribution. Compared with traditional point-to-point wiring, busbar trunking for lighting provides a cleaner installation layout and allows tap-off units, sockets, and lighting accessories to be arranged along the busway route.
This product is suitable for projects that require distributed lighting power, small equipment power supply, and flexible electrical connection points.
Aluminum alloy enclosure for lightweight structure, corrosion resistance, and stable installation
PVC insulation for safe and practical lighting bus duct applications
7 copper strip configuration for power and lighting circuit distribution
Rated current range from 18A to 100A
Standard length: 4 meters
Tap-off openings every 400 mm for flexible tap-off box installation
Modular block structure for fast electrical and mechanical connection
Large-span installation up to 2 meters, subject to project layout and installation requirements
Can be used with small lighting fixtures in suitable applications
Tap-off boxes can be equipped with circuit breakers or fuses according to project requirements
Flexible installation for industrial and commercial lighting systems
ZHERUTONG lighting busway systems are suitable for power supply and lighting distribution in:
Garment production lines
Footwear and headwear factories
Electronics manufacturing plants
Underground parking areas
Supermarkets and retail facilities
Workshops and production lines
Commercial lighting distribution projects
For project-specific selection, please confirm the current rating, busway length, tap-off spacing, installation environment, and required accessories before ordering.
The Q-Type lighting busway system can be configured with a range of components and accessories to support power distribution and flexible installation in industrial and commercial environments.
| Component | Model | Part No. | Description |
|---|---|---|---|
| Lighting Busway Section | JTQ-LK-7-30A / JTQ-LK-7-50A | 210-1-1 / 210-1-2 | Standard aluminum alloy lighting busway section, 4m length, used for power and lighting distribution. |
| Rotary Single Phase Socket | JTQ-LK-X-CZ1 | 210-13 | Single-phase tap-off socket for lighting or small power connection. |
| Rotary Three Phase Socket | JTQ-LK-X-CZ3 | 210-14 | Three-phase socket for power distribution and equipment connection. |
| 5-Pole Distribution Box | JTQ-LK-5-PDH | 210-15 | Tap-off box with circuit breaker or fuse for controlled power output. |
| Lamp Current Collector + Switch | JTQ-LK-JDQ+KG | 210-17 | Used to connect lighting fixtures and control power supply. |
| Luminaire | T8L-18W / T5L-18W / T5P-28W | 180-7 / 180-8 / 180-9 | Lighting fixtures compatible with the busway system. |
| Copper Strip Buckle | JTQ-LJK-30A | 210-15 | Component for securing copper conductors inside the busway. |
| Rotary Power Collector | JTQ-LJ-QDM | 210-14 | Used for continuous power collection along the busway. |
| Beam Clamp | JTQ-LK-DJ | 210-7 | Mounting accessory for fixing the busway to structural beams. |
| Connection Unit | JT1-PK-LJH | 210-8 | Electrical and mechanical connection between busway sections. |
| Terminal Feeding Unit | JTQ-LK-DG | 210-9 | End feeding unit for connecting the busway system to the power source. |
Before selecting a lighting bus duct, engineers and buyers should confirm the following project information:
Required current rating
Three-phase or single-phase power supply requirement
Lighting circuit arrangement
Busway route and installation length
Tap-off point spacing
Socket and tap-off box requirements
Installation environment
Required accessories and feeding method
ZHERUTONG can support product matching based on project requirements and technical drawings.
ZHERUTONG provides technical datasheets, installation manuals, and product specifications for busway and busbar trunking systems. These resources support engineering design, product selection, and project planning.
For detailed product selection, please contact our team or refer to the related technical documents.
A lighting busway system is a busbar trunking system used for lighting and small power distribution. It allows power to be distributed along a fixed busway route and connected through tap-off units, sockets, or related accessories.
Lighting bus duct is commonly used in factories, workshops, supermarkets, underground parking areas, and production lines where lighting and small power distribution points are required along a continuous route.
Lighting busway provides a more modular distribution method. Tap-off points can be arranged along the busway, making it suitable for production lines and commercial spaces where connection points may need to be planned in multiple positions.
Yes. This Q-Type lighting busway system provides tap-off openings every 400 mm, allowing tap-off boxes to be arranged according to project requirements.
ZHERUTONG supplies busway systems and related busbar trunking products for industrial and commercial power distribution projects. For lighting busway system selection, please contact our team with your project requirements.
Please provide the required current rating, busway length, quantity, installation layout, tap-off point requirements, and accessory requirements.
Looking for a lighting busway system manufacturer or lighting bus duct supplier? Contact ZHERUTONG for product selection, accessory matching, and quotation support.
Email: rtdq@rtbusway.com
Tel: +86-13867770913
Address: No. 186, Zhongxin Avenue, Yueqing City, Wenzhou, Zhejiang Province